AltimetryData flowProcessing

Altimeter measurements | Orbit Determination | Geophysical corrections | Instrumental errors | Reference surface | Flags | Retracking | High-level processing

3.2.2.4. Instrumental errors

The following corrections can be computed (depending on the satellites):

• USO correction (Ultra-Stable Oscillator)
  Correction for drift of onboard oscillators used for the internal clock, particularly for sending radar pulses. The degree of drift depends on the oscillator frequency.
  Order of magnitude: 1 cm
   
• centre of gravity
  Correction for variations in the satellite's centre of gravity, due to fuel consumption, solar panel orientation and other factors (the presence of this correction depends on the satellites).
   
• Correction tables
  Corrections for instrument and algorithm effects that cannot be modelled. These tables are derived from altimeter simulations (the presence of this correction depends on the satellites).
  Order of magnitude: a few centimeters
   
• Waveforms (before retracking)
  Correction for effects due to filters used to eliminate certain frequencies in the return radar signal.
  Order of magnitude: a few centimeters